CONTROLLER

The controller is designed for use in heat treatment power sources and furnaces, as well as applications that require precise temperature control, reliable and safe process control.

HM-Rigel26 controllers and HM20 software are used in Heatmasters’ heat treatment equipment. The system is also suitable for other producers’ equipment.

One HM-Rigel26 controller has a maximum of six heating channels and six thermocouple connections. A total of five controllers can be connected together. Additionally, each controller has six external outputs that can be used to control separate actuating devices such as cooling fins, ventilation, wagon drive control etc.

The flexible use of heating channels

Heating channels can be grouped together as needed. Each group or single heating channel runs independently. You can monitor each process separately, and monitor their diagram and numerical values. The result of each process can be printed out as an individual heat treatment certificate.

HM-Rigel26’s additional functions

Six additional measuring points are in use when installing the HM-MES6 T/C measurement card.

A GSM alarm system sends a message to your mobile phone with information of the failure. For this you will need to install an HM-GSM-Alarm card.

An audio function allows you to make a voice call from the heating unit. Two pre-set phone numbers are available. For this you will need to install an HM-AV audio card.

The controller can be set to switch off the heating device when the process is complete.

Print paper version (.pdf)